Flip Lid Instrument Case

A high quality case moulded in black polypropylene with textured finish. The anodised aluminium front panel is secured via 3 fixing screws provided. The hinged lid has an integral catch arrangement and incorporates a label attachment area on the outside.

» More Info

Free-Standing PSU Enclosures

Neatly designed two-part lead-in/lead-out PSU cases held together by 4 screws and with shuttered ventilation slots on all sides. Moulded from flame retardant material to UL94V-0, with cable entry and exit slots at each end.

» More Info

Gas Sensor Cases

Designed for wall mounting, these two-part ABS cases in black or ivory have pre-moulded ventilation slots on two sides and are ideal for room thermostats or gas sensors. Internal bosses for PCB or component mounting. Snap-fit top/front part. External dimensions: L71 x W71 x H27mm.

» More Info

Hand-Held Case - Type P9

Instrument cases in grey ABS, with either a solid front or a display window (72 x 35mm). The halves are held together by 4 M3 screws into brass inserts. Battery compartment will house either 1 x PP3 or 2 x AA batteries. Includes removable tilt stand. PCB mounting bosses are moulded into both halves of the case.

» More Info

Hand-Held Enclosure - Type BC2

A hand-held case moulded in high impact matt black, white or grey ABS. Integral PP3 battery compartment with separate removable cover. Clip-in battery terminals supplied as standard. 4 integral location pegs and sockets will hold a PCB in place without further fixing.

» More Info

Hand-Held Enclosure - Type BC3

Attractive hand-held case suitable for instrument or control units. The unit has a battery compartment with sliding cover which will house a PP3 size battery. Available in black, white or computer grey high impact ABS.

» More Info

Hand-Held Enclosure - Type BC4

A high quality two-part calculator-style case moulded in matt black or white ABS. Integral battery compartment with sliding cover will accommodate 2 x PP3 type batteries. PCB pillars fitted in both halves of the case. Fixing by 4 self-tapping screws provided.

» More Info

Instrumentation Cases

A range of two-part cases for instrumentation or telecommunication equipment, in high impact and flame retardant ABS. Tongue and groove joints provide environmental sealing to IP54. PCB guide slots and bosses moulded into both halves.

» More Info

Miniature Keyfob Cases

Designed for a variety of remote control applications. Two-part snap-together black ABS cases with LED window hole, battery compartment and terminals. Internal bosses facilitate PCB mounting. Available with one, two or three buttons.

» More Info

Miniature Sloped Module Case

A versatile miniature case, ergonomically designed for desk, dashboard, pocket etc. Can be used either way up. Moulded in high impact matt black or white ABS with a self-tapping screw fixing. Cable knockout provided for flying lead applications.

» More Info

Power Supply Enclosure - Type PS2

Rugged power supply case, moulded in black ABS. A flame retardant version to UL94V-0 is also available. Accommodates transformers up to 12VA, E154, S35 or S147 size leaving space for ancillary components.

» More Info

Power Supply Enclosure - Type PS5

13A plug-in style power supply case, with choice of plastic or brass earth pins. A flame retardant version is also available. Solder spills are provided for direct connection to a transformer (up to 6VA can be accommodated).

» More Info

Self-Adhesive Feet

A range of Polyurethane feet with high-tack adhesive backing. Flammability rating to UL94HB. Available in a range of sizes and colours, these are supplied in multiples of sheet quantities only, as indicated.

» More Info

Siren/Speaker Housing

Two-piece white ABS case with louvred front and recessed panel. Can be clipped together to provide either sloping or standard shaped box. Internal locating pegs provided to accommodate a standard 87mm mylar speaker (Order Code 360031). Ideal for intercoms, extension speakers, internal alarms/sirens etc.

» More Info

Sub-Miniature Keyfob Case

A miniature keyfob case designed for remote control applications. Two-part snap-together case with LED window hole, battery compartment and terminals. Colour all black with single integrally moulded black button. Dimensions: L45 x W36 x H14mm.

» More Info

Vented Plug-In PSU Enclosures

13A plug-in style power supply enclosures to BS1363 and UL94V-0. All three sizes have brass earth pins, and sleeved brass live and neutral pins. Shuttered ventilation slots are moulded in both parts of the cases. Insulated flying leads are provided for transformer connections.

» More Info